← جميع المنتجات

دعامات الأرضيات القابلة للتعديل

DRS

ترد الأوصاف والرسومات والمواصفات الفنية مباشرة في صفحات كتالوج 2026 أدناه.

الكتالوج والبيانات الفنية الأصلية باللغة الإنجليزية.

اطلب عرض سعر
DRS

تفاصيل الكتالوج الأصلي

صفحة الكتالوج 16

DRS Foot is a long-lasting and high-strength raised floor support system developed specifically for outdoor applications and areas with a high risk of corrosion. Thanks to its stainless steel and aluminum body structure, it provides maximum resistance to moisture, water, dust, air, and harsh environmental conditions. It is a reliable choice for demanding applications such as outdoor floors, balconies and terraces, technical areas, open-air platforms, and industrial applications. Its corrosion-resistant structure minimizes maintenance needs and ensures long-lasting performance. The special fire-resistant and non-combustible plastic cap used in the system provides extra safety against high temperatures. Its non-flame-retardant structure prevents the spread of flames in the event of a fire, increasing the safety of the system. At the same time, the cap structure strengthens the panel seating, contributing to the overall stability and long-lasting use of the system. DRS

قد يختلف ترتيب النص عن الصفحة الأصلية متعددة الأعمدة.

صفحة الكتالوج 17

DRS / TECHNICAL Technical Data: Element class according to DIN EN 12825: 6 Single Load: ≥ 4 kN Distributed Load: ≥ 9 kN Breaking Load: ≥ 11 kN Head: Top head: Ø90 mm shaped aluminum head Wall thickness: 4 mm Length: 45 mm The top head has M16 × 2.0 threads. The head has a fire-resistant plastic cap suitable for the panel. Load Capacity (System): According to DIN EN 12825 standard: Single load capacity: ≥ 4 kN (~400 kg) Distributed load capacity: ≥ 9 kN (~900 kg) Breaking load: ≥ 11 kN (~1100 kg) Rod and Lock Nut: Bottom cap (base): Ø90 mm octagonal aluminum base Wall thickness: 4 mm Length: 12 mm The bottom cap has M16 × 2.0 threads. Adjustment rod: M16 × 2.0 thread – 150 mm length, steel Lock nut: M16 × 2.0 thread – 8 mm thickness, steel The rod is fixed to the bottom cap. The top cap can move up and down on the rod. The system offers ±3 cm height adjustment. After adjustment, the height is fixed with the lock nut. Adjustment and Fixing: After the appropriate height adjustment, the adjustment nut at the connection point of the head and foot is fixed with Loctite 243 or equivalent adhesive.

قد يختلف ترتيب النص عن الصفحة الأصلية متعددة الأعمدة.

تنزيل الكتالوج