← Tous les produits

Vérins réglables pour plancher

YSF-XL

Les descriptions, dessins et caractéristiques techniques sont présentés directement dans le catalogue 2026 ci-dessous.

Le catalogue et ses données techniques originales sont en anglais.

Demander un devis
YSF-XL

Détails du catalogue original

Page du catalogue 30

The YSF – XL Leg is the strongest raised floor leg in the series, developed for heavy-duty applications requiring very high load-bearing capacity and maximum rigidity. It provides long-lasting performance and superior stability in floors under heavy loads. To adapt to the technical requirements of different projects, the YSF – XL Leg is manufactured with: 60x60x2 mm galvanized box profile, 4 mm thick, 120x120 mm top cap, 200x200x8 mm flat plate base. The system uses M24 rods, and height adjustment is done with metric 24 nuts. The thickness of the nut used is 17 mm. The surface where the rod presses is reinforced with an 80x80x6 mm steel plate to distribute the load over a wider area and reduce local stresses. The bottom and top plates are joined to the box profile ends by welding around the circumference. Thanks to this welded structure, system integrity is maximized, and the risk of deformation under heavy loads is minimized. The tie rod is cold-riveted to the top head using the roll riveting method. This method provides a high- strength, reliable, and long-lasting connection. Thanks to its superior load-bearing capacity and reinforced structure, the YSF-XL Foot is an ideal solution for industrial areas, data centers, technical rooms, archives and storage areas, and special projects with high load density. YSF - XL

L’ordre de lecture du texte peut différer de celui de la page originale en colonnes.

Page du catalogue 31

Technical Data: According to DIN EN 12825 standard: Single load capacity: ≥ 18 kN Distributed load capacity: ≥ 60 kN Breaking load: ≥ 65 kN Head: Top head plate: 120 × 120 × 4 mm Rod: M24 Height adjustment: Made with M24 nut Nut thickness: 17 mm Rod bearing surface: 80 × 80 × 6 mm steel plate Rod – head connection: Cold riveted by rolling riveting method Suitable for 40×40 – 40×60 – 40×80 – 60×60 mm profiles Base and Rod: Foot profile: 60 × 60 × 2 mm box profile Foot base plate: 200 × 200 × 8 mm flat plate Adjustment and Fixing: The bottom and top plates are joined to the ends of the box profile by circumferential welding. Load Capacity (System): According to DIN EN 12825 standard: Single load capacity: ≥ 18 kN (≈ 1800 kg) Distributed load capacity: ≥ 60 kN (≈ 6000 kg) Breaking load: ≥ 65 kN (≈ 6500 kg) YSF - XL TECHNICAL

L’ordre de lecture du texte peut différer de celui de la page originale en colonnes.

Télécharger le catalogue